Dead hedge from brash: before and after on a chalk boundary
Every hedge renovation or coppice job on a farmland boundary around Shepherdswell or Coldred produces brash: the woody offcuts, cut stems and thin material that is too small to burn cleanly and too coarse to shred down quickly. Most of it ends up heaped at the edge of a paddock and left to rot for a year or two. Building a dead hedge turns that pile into a structure that works immediately, holding a boundary, feeding invertebrates and providing cover for the farmland birds that use these chalk downland hedgerows.
Before
A typical brash heap after a hedge renovation or laid-hedge clearance on a Coldred or Shepherdswell boundary is around 1 to 2 metres high at its peak, loose and tangled, with longer stems poking out at every angle. It is not compact enough to stop a dog or a child, not stable enough to serve as a windbreak, and the wildlife value is limited because there is no defined structure for animals to navigate or shelter within. The heap sits in roughly the same spot for two or three years, slowly sinking from the bottom as the material rots, then disappears into the soil. That is a reasonable outcome but not the best one available, particularly on a paddock edge close to arable ground, where the gap between the existing live hedge and open field is exactly the kind of interface that yellowhammer and linnet use for foraging cover in spring and autumn.
After
A finished dead hedge on that same boundary is 1.2 to 1.5 metres high, 60 to 70 centimetres wide, running in a straight or gently curved line along the paddock edge. The face towards the field is tidier than a brash heap because the longer stems are laid in with their cut ends outward and the smaller material is packed in behind. The base is left slightly open, with a 10 to 15 centimetre gap between the lowest layer and the ground, so hedgehogs and other small mammals can pass through underneath. Within a single season the structure begins to colonise: mosses cover the outer stems, fungi work at the heartwood inside, and invertebrates move in. By the following autumn the dead hedge has become a linear habitat feature in its own right, dense enough to provide real nesting cover for wrens and dunnocks, and the material at the centre is already beginning to break down into the kind of loose, decomposing woody substrate that slow-worms and stag beetles use on the North Downs chalk.
What happens in between
Building a dead hedge is straightforward work, but getting the structure right at the start makes the difference between something that lasts three years and something that is still useful after seven or eight. The sequence is as follows:
- Choose the line and clear the base. Run the dead hedge parallel to an existing live hedge if there is one, ideally leaving a 60 to 100 centimetre gap between the two. That gap becomes a sheltered corridor. If the dead hedge will run along a field edge with no existing hedge behind it, peg the line with a string first. Clear any coarse grass or bramble from the base so the stakes go in cleanly.
- Drive the stakes. Use pairs of upright stakes, hazel or ash are both fine, roughly 1.5 to 1.8 metres long and pointed at the base, spaced 50 to 60 centimetres apart along the line, in two parallel rows 60 to 70 centimetres apart. On chalk the ground can be very hard even in autumn; a sharp point and a mallet are usually enough, but a steel bar iron opened a pilot hole first on the harder spots I have encountered around Shepherdswell. Drive the stakes in firmly because the weight of packed brash will push outward as you fill the structure.
- Start with the longest material. Lay the thickest, longest stems in first, running lengthways along the dead hedge between the two rows of stakes. These form the spine and give the structure most of its height. Hawthorn, blackthorn and field maple brash from a chalk boundary hedge are all good for this layer: dense, thorny material that packs tightly and deters access from outside.
- Fill with smaller material. Pack the thinner brash, the small-diameter twigs and the cut ends from the renovation, into the gaps between the longer stems, working upward from the base. The aim is a structure that is dense enough to slow the wind without being solid: a good dead hedge breathes rather than acting like a wall, which is better for the invertebrates inside it.
- Weave longer flexible stems over the top of the stakes. If the brash includes hazel or dogwood stems that are pliable enough, weave one or two runs along the top of the stakes to hold the pile from spreading outward at the crown. This is optional but it extends the life of the structure and keeps the profile tidy enough for a garden boundary or a paddock that livestock use.
- Leave the base gap. Do not pack material right to the ground. The 10 to 15 centimetre gap at the base is the access point for hedgehogs, slow-worms and amphibians moving along the boundary. On a chalk downland site it is worth keeping this gap consistent and not gradually filling it with leaf litter and small twigs during the first winter.
- Top up annually. The bottom layer rots first. Add a fresh layer of brash to the top each winter, working it down into the existing structure, to keep the dead hedge at its original height. After five or six years the core will have broken down substantially and the whole structure will begin to merge with the surrounding soil, at which point the dead hedge has done its job and either new stakes can be driven or the site can be left as a low earth mound seeded with the insects and fungi that colonised the wood.
Does building a dead hedge disturb nesting birds?
Building and topping up a dead hedge is best done between September and February, well clear of the main nesting window under section 1 of the Wildlife and Countryside Act 1981 (1 March to 31 August). There is no cutting of living vegetation involved, so the work does not carry the same risk as hedge-trimming. That said, if you are building against an existing live hedge in spring, check for active nests before driving stakes close to the base of the living hedge. Wrens and dunnocks, both common in this part of Dover District, nest low and can begin early in a mild spring.
What the chalk makes different
Two things are worth noting about dead hedges on the chalk downland around Shepherdswell. First, the drier, free-draining soil here means the material at the base of the structure rots more slowly than it would on heavy clay. That is an advantage in terms of longevity: a dead hedge built in autumn in Coldred will still be structurally useful three or four years later without topping up, whereas the same structure on a damp lowland site might need attention after two winters. Second, the species mix in a chalk boundary renovation produces particularly good building material. Blackthorn brash, with its long, rigid, thorny stems, makes an almost impenetrable outer face; field maple fills the interior quickly because its branching structure is naturally dense; and hawthorn brash provides the kind of mixed-diameter fill that creates the greatest range of invertebrate microhabitats within the pile. If you have a choice of which renovation brash to use, mix all three rather than using a single species.
The wildlife benefit on the North Downs chalk is genuine and specific. Yellowhammer, one of the farmland birds recorded in the Shepherdswell and Coldred area, uses the sheltered interface between a dead hedge and an existing live hedge as foraging and loafing cover, particularly in autumn and winter when the stubble fields nearby are turning over. A well-placed dead hedge on a paddock or arable edge extends the value of the existing live hedge structure into the field margin without any new planting or waiting for establishment.
Related guides
Thinking about what to do with the brash after a renovation?
I can build a dead hedge from the cuttings on the same day as the hedge work, or return separately to do it once the renovation is finished. Call 07763 100 477, message on WhatsApp, or email hello@shepherdswellhedges.co.uk and I will give a fixed price before any work starts.
Sources: RSPB, "Build a dead hedge for wildlife" (rspb.org.uk); Earthtrust, "The wonders of a living dead hedge" (earthtrust.org.uk); Woodlands.co.uk, "Dead hedging: wildlife friendly and people guiding" (tom.woodlands.co.uk); Wildlife and Countryside Act 1981, section 1.